Leasing Packages Available. Click Here for more information.










Metalcraft Tools A(R)
209 Linder Loop
Crossville, TN 38571
PH:(931)210-1009



Watch the video on the set-up of our Power Hammer.




COMPLETE SET-UP AS SHOWN
$12,490.00
THIS IS A GREAT TOOL
FOR THE PRICE!



THE DUAL HEAD POWER HAMMER
Mounted on Metal 12" x 12" x 1/2" Wall Tubing
And 4ft x 4ft x 1" Plate

Power Hammer 'foot print' 48"D x 72"W x 90"H

This is the Recommended Set up for
Maximum Performance and Production

"We believe this will be a good tool for
hobbyists as well as professional shops.
If you are interested, give us a call."

Throat Depth: 26" - 1 HP Motor
Approx: 900 Blows per minute


The Power Hammer
Single Arm



The Power Hammer Kit
THROAT DEPTH 26" - Approx. 900 Blows per Minute
Item #80 $2,595.00

THE POWER HAMMER 'KIT' INCLUDES

CONNECTING ROD
CRANK PIN & SPACER
BEARINGS (TORRINGTON)
INNER RACE (TORRINGTON)
U-BOLTS (2)
SPRING
SPOOLS (4)
SHACKLES (4)
BELTING (5) FEET
1/2 x 2 1/2 STRIPPER BOLTS (4)
RAM
1/4-20 X 1 3/4 SET SCREWS (4)
1/4-20 X 1 1/2 SET SCREWS (6)
1/4-20 JAM NUTS (10)
1/4 X 28 GREASE FITTINGS (2)
DOVETAIL BLOCK & GIB
3" MOTOR PULLEY
6" MOTOR PULLEY
1 UPPER DIE AND 1 LOWER DIE
CLUTCH IDLER PULLEY WITH BOLT & SPACER
FLYWHEEL
SHAFT WITH KEYS
PILLAR BEARINGS (2)
ANVIL
CLUTCH RETURN SPRING
HEIM JOINTS (2) ROD END BEARINGS
1/4-20 EYE BOLT
1 HP TEFC MOTOR
DRIVE BELT
AND PLANS TO BUILD ARMS

YOU FURNISH MATERIAL AND LABOR TO FABRICATE ARMS AND PEDESTAL.


OPTIONS FOR THE POWER HAMMER

THE POWER HAMMER "KIT"
Includes 1 upper flat die & 1 lower radius die

$2,595.00
FABRICATED ARMS "Factory Assembled and run in"

$2,400.00
COMPLETE PEDESTAL
12"X12" - 1/2" Wall on 4' X 4' X 1" thick base plate (Powder Coated)

$2,500.00
. . . . . . . . . . . . . . . . . . . . . . . . . . . .Single Head Assembly TOTAL
$7,495.00

SECOND POWER HAMMER "KIT"
COMPLETELY ASSEMBLED

$4,995.00
DOUBLE HEADED POWER HAMMER ON PEDESTAL
Completely Assembled (One complete set of Power Hammer dies are included with the Double Headed Power Hammer at no cost.)
S & H Not included
$12,490.00

POWER HAMMER DIES
Click here to see The Power Hammer in slow motion.

THESE DIES ARE AVAILABLE FOR THE POWR HAMMER:

Bottom Die MCH 24R
$185.00
Bottom Die MCH 12R
$175.00
Bottom Die MCH 6"
$175.00
Bottom Die MCH 4"
$175.00
Flat Top Die - MCH-F
$175.00
SHRINKING DIE SET MCH-SH (2 PIECES)
(The material is 4140-Heat treated to 54-56 RC Scale)

$750.00
SOFT DIE SET MCH-SD (2 PIECES)
(Not Heat Treated)

$250.00
NEW! LINEAR DIES SET MCH-L
(4140 Heat Treated)


$750.00



"They work great!
They really push the metal around fast.
I'm impressed."


Phillip Lincoln
Ngatea Panel Beaters, New Zealand

COMPLETE SET - Value
(If purchased with Single Power Hammer - Cost $2,250.00)
(Complete set INCLUDED with purchase of Double PH)


$2,625.00
BLANK DIES ALSO AVAILABLE MCH-BLANK
(4140 Not Heat Treated)

$100.00




Books for the Smithy's
The Shop Built Powerhammer
by Grey Eagle Press $25.00
Complete materials list and plans for building a 50 lb powerhammer. Modeled on the Little Giant series. Welded construction. Photos and drawings.
Excellently done. 42 Pages, 8-1/2 x 11 (Paperback)

Building the Gas Forge and Foundry by Richard R. Kern $15.00
Enhance your shop and get the versatility you need in your forging and casting operations! Includes easy to follow step-by-step instructions to build your own gas forge. This outstanding book that shows how to bring stock to a welding heat with the jet engine flame holder design. The culmination of many ideas and practical experience to make a gas forge capable of full welding heat. A section of the book is on calculating heat for any given forge. Includes references for heat energy and gas output. You'll enjoy building the forge or furnace and then realizing you finally have full control offer the heat you need. 154 pages, 5-3/8 x 8 (Paperback)

The Little Giant Powerhammer by Richard R. Kern $35.00
The rebuilding, history and use of The Little Giant Power Hammer. This will guide you through the entire restoration process of this popular hammer. The result should be a restored hammer which will operate properly, not one running on myth and prayers. If you are about to buy a powerhammer, the investment in purchasing this book will be recouped many, many times over. You will know what to look for and will have some concept of what the restoration will involve. Contains over 200 Tables, Charts And Illustrations. 300 pages, 7-1/8 x 10-1/4 (Paperback)



AIR PLANISHING HAMMER HANDBOOK

by Fay Butler & Jonas Noble

Contact Fay at fayfab@mindspring.com
or call him at (413) 477-6449


Tools Designed By and Manufactured By
METALSHAPERS


All rights reserved.
Metalcraft ToolsŪ and all contents of this website
are copyrighted and owned by W.C. Davis.


Registered with C.C.R. CAGE/NCAGE Code: 42XH5